Drafting Procedures of Ladies Kurti

Drafting Procedures of Ladies Kurti

R.S. Balakumar
M.A.(SOCIOLOGY ), M.L.M.(Labour Management), Pursuing MBA (EXECUTIVE) in (FASHION-TECH), MISTE.,
Chennai, India
Cell: +91-9283182955
Email: rsbalakumar1953@gmail.com



Introduction:
Ladies kurti is look like as kameez. But kurti’s length is shorter then kameez. It is a very comfortable dress. It is used in all season but specially used in summer for comfortness. Kurti is usually worn by college going girls in India, Bangladesh, Sri Lanka. 
Ladies kurti
Ladies kurti

Drafting Procedures of Ladies Kurti:
 
Measurements Required: Full length 30” N.W length 16 ½” Shoulder width 14” mid Bust 36”. Waist 30”. Hip neck 15” long sleeve length 23” girth 11”.

Pattern parts Required:- Front cut 1 on fold, back cut 1on fold, sleeve cut2.

Material suggested:- Cotton, poplin, silk, crape, synthetic, chiffon crape and satin.

Material Required: - 2.50 mtr.Cloth width 42”.

Drafting Details of Front Part: 
  • 1-2= Full length + 1 ¼”.
  • 1-3= Arm depth, 1/6th Bust +1”.
  • 1-4= N.W. length + ½”
  • 5 is the midpoint of 3 to 1measure. Front neck shape should drawn.
  • 6-1= ½ shoulder width + ½”
  • 7-6= Draw a line.
  • 8-3= 1/4th Bust +1”.
  • 9-6= shoulder’s slope ¾”
  • 10-1= 1/6th Bust +1”.
  • 11-10= Same as 5 to 1 measure.
  • 12-11= 1 ½” at 45o.
  • 8-13-14= 1 ½” Draw a line.
  • 15-13= ¾” Waist shape.
  • 16-2= 1/3rd Hip +1 ½”.
  • 17-16=3/4” Bottom shape.
  • 18-7= 1” as per draft.
  • 19 is the mid-point of 6 to 7.
  • 19-20= ½” inward arm hole curve to be draw
  • Waist middle dart to the drawn, 8”x ¾”
  • Neck open front 5 ½” (21 to 22)
Kurti's front part
Drafting Details of Back Part:
After cutting the front portion, laid on another paper and draw the back portion as per instructions given below.
  • 23-1= 1 ½” back neck drop.
  • 24-1= Save as front 1 to 10measure.
  • 25-24= 1 ½” as per draft, construct the back neck shape.
  • 26-27-28= armhole curve is to be drawn away from the front arm curve portion.
  • Back waist dart 8” x ¾” middle of 4 to 15 as per draft.
Kurti's back part
Drafting Details of Sleeve Part:
  • 1to2=sleeve length+1”.
  • 1to3=1/8thbust-3/4”.
  • 3to4=1/4 bust-3/4”.
  • 2to5=1/6th bust-1/2”.
  • 6 is the middle of 1to4 measure.
  • 7 is ½ of the 6to 4 measure.
  • 8 is the middle of 6 to 1 measure.
  • 9 -7=3/4”shape as per draft.
  • 8-10=3/4 upward shape as per draft.
  • 1-10-7-4=back armhole shape.
  • 4-6-1=front armhole shape as per the draft.
Kurti's sleeve
You can also see:
Drafting and Cutting Procedures of the Women’s Saree Blouse



0 comments:

Comment here

Textile Learner is the largest Textile Blog over the net. It is an ultimate reference for textile students. It describes textile articles in comprehensive. It also supplies news on latest textile technology, educational institute news of the world.