## How to Increase Higher Productivity in Apparel Industry

Increasing Higher Productivity in Apparel Industry
R.S.BALAKUMAR
M.A.(SOCIOLOGY ), M.L.M.(Labour Management), Pursuing MBA(EXECUTIVE) in (FASHION-TECH), MISTE.,
Chennai, India
Cell: +91-9283182955

What is productivity?
In simple words, is the relationship between Output and Input. The output in Apparel manufacturing factories can be pieces of finished garments. The output of sections with in the factories could be metres of the fabric inspected in fabric inspection section, cut components in cutting section, number of garments ironed in the ironing section and soon. The examples of input are man hours, machine hours, metres of fabric is being consumed (or) electricity consumed productivity can be calculated as follows

Output
Productivity = .......................
Input
Productivity is mainly based on with the expected output per sewing operator is 25 pieces of Jeans per shift and the operator productivity in terms of efficiency becomes 20/25 = 80%. The expression is to be called as “productive efficiency”.

Partial productivity is the ratio of output to one class of input. I have labour productivity it means (The ratio of output to labour input) is known as partial measure. Likewise, material productivity means (The ratio of total output to material out Put) and machine productivity means (The ratio of output to machine input) are the suitable examples for partial productivity. Total productivity is refers the ratio of total output to the sum of all input factors. It is a type of higher level of productivity assessment combining several partial productivity measures.

Apparel manufacturers in international level will prefer to use partial productivity measures like labour or machine productivity. This is very much easy to evaluate its performance or to plan further improvement.
 Production in apparel industry
According to the Author of the book “Introduction to clothing production management” by A.J. Chuter, In an incentive based payment environment the amount of time the operators are able to do the task they are trained for in an unhindered fashion can be called “hours on standard” or on incentive. For some proportion of time during the work shift, the operators may not be able to work on their assigned task with full efficiency due to various reason like machine delays, waiting for work, repairs or doing an operation one is not fully trained in, etc. This time is called “off incentive” or “off standard time. The performance level of operators drops during off incentive time, as they only earn a fixed hourly rate without incentive”.

Factors that cause loss in productivity.

 Annual labor turnover 24% Absenteeism 10% Methods effectiveness 90% Average factory performance 90% Repairs returned to operatives 10% Rejects 2% Machine delay ideal 1% Machine delay other work 4% Unmeasured work 20% Others repair 2% Waiting time 1% Balancing losses 5% Work study 1%

Source: “Introduction to clothing production management” – A.J. Chuter.

To increase the Approval productivity following Do’s and Don’ts are to be considered according to Dr/ Rajesh Bheda – Professor at the dept. of GMT, NIFT, New Delhi.

Do’s:
1. It is a must for every apparel producer, to start measuring productivity on a continuous basis.
2. Productivity must be measured at various levels starting from operator / machine level, going up to plant level.
3. Measure productivity in physical as well as value terms against all the quantifiable inputs.
4. Monitor productivity performance to track improvement over a period of time.
5. Do not accept claims of people without clearly spelt out evidence on productivity improvement.
Don’ts:
1. Ignore productivity measurement as unnecessary paper work.
2. Assume your team understands what productivity is its true importance and the amount of value productivity improvement can add to your organisation.
3. Leave productivity improvement initiatives to your people thinking that it is common sense.
4. It better need to show commitment to productivity improvement and lead the team, after all “common sense is not common” and you cannot run away from your responsibility of leading by example. To increase the higher ratio of Approval productivity in apparel industries the following total productivity maintenance all to be introduced. (TPM)
Benefits of TPM are mentioned below:
1. Increased equipment productivity
2. Reduced equipment down time
3. Increased plant capacity
4. Lower maintenance and production cost.
5. Approaching zero equipment – caused defects
6. Improved return on investment (ROI)
7. Rectified customer complaints
8. Reduced inside plant accidents
9. Ensuring pollution control measures
10. Better understanding of the performance of equipment’s.
11. Better understanding of critical equipment and the worth of deploying improvement effort for potential benefits.
12. Improved work team and a less adversarial approach between production and maintenance
13. Improved procedures for change overs and set ups
14. Better training of operators and maintainers
15. General increased involvement of the work force
16. Multi skill training to be given among the workers
17. On the job training lino to be established inside the sewing floor
18. Giving rewards and awards to productivity based workers
19. Medical, educational, housing benefits to be given to employees will always make them as a loyal employees; continuously work in one factory for a longer time.
20. Fringe benefits tend to increase higher productivity constantly to meet over the customer’s requirements.
Pillars of Total productive maintenance are as follows:
1. Five 5 policy implementation
2. Jishu kozen (Autonomous maintenance)
3. Kaizen
4. Planned maintenance
5. Quality maintenance
6. Training
7. Office TPM
8. Safety, Health and environment
Five 5 policy means:
1. Seiri (Sort out)
2. Seiton (organize)
3. Seiso (shine the work place)
4. Seiton (standardization)
5. Shitsuke (Self-discipline)
Today’s world class improvement of Japanese productivity increased only because of these 5-s policy matter.

Kaizen means ‘Change for the better’ in Japanese. The best English equivalent is “improvement” Kai and Zen which means change and good respectively.

Kaizen model consists of five elements which are Teamwork, personal discipline, breakthrough improvements and activities to sustain such improvements.

Conclusion:
To increase the higher productivity in Apparel industry must adopt the above mentioned applications inside the plant, these implementations are surely increase the constant rate of higher productivity in the world wide Apparel Industries.

Reference:
1. Introduction to clothing production management by A.J. Chuter
2. Production and operations management by R. Panneer Selvam
3. Apparel manufacturing Analysis by Jacob Solinger.
Sharing Knowledge: Students, teachers and professionals can publish your article here. It is a platform to express your knowledge throughout the world. For details: Submit Article

### Editor-in-Chief:

Mazharul Islam Kiron is a textile consultant and researcher on online business promotion. He is working with one European textile machinery company as a country agent. He is also a contributor of Wikipedia.