Modern Blow Room Line | The Installation as a Sequence of Blowroom Machines | Modern Blow Room Line for American

Modern Blow Room Line
In processing the material, different types of machines are necessary, namely those suitable for opening, those for cleaning and those for blending. Different intensities of processing are also required, because the tufts continually become smaller as they pass from stage to stage.Accordingly, while a coarsely clothed cleaning assembly is ideal after the bale opener, for example, it is inappropriate at the end of the line.
Modern Blow Room Line
Modern Blow Room Line
Therefore, there are no universal machines, and a blowroom line is a sequence of different machines arranged in series and connected by transport ducts. In its own position in the line, each machine gives optimum performance – at any other position it gives less than its optimum. Also there may be advantages in different modes of transport, feeding, processing, cleaning and so on from one machine to another along the line. 
 
Finally, the assembly of a blowroom line depends among other things on:
  • The type of raw material;
  • The characteristics of the raw material;
  • Waste content;
  • Dirt content;
  • Material throughput;
  • The number of different origins of the material in a given blend.
Modern blow room line for American:

Pima Cotton:

Blendomat

Heavy material separator

Multiple mixture

CVT1 (fine) / CVT3 (coarse)

Dustex

Feeding unit (chute feed) for card


Modern blow room for American upland cotton containing more than 3% trash:

Blendomat

Heavy material separator

Multiple mixture

Dustex

Feeding unit for card

0 comments:

Comment here

Textile Learner is the largest Textile Blog over the net. It is an ultimate reference for textile students. It describes textile articles in comprehensive. It also supplies news on latest textile technology, educational institute news of the world.