Manufacturing Sequence of Readymade Garments( RMG ) in Garments Factory

Stepwise Garments Manufacturing Sequence on Industrial Basis is given below:

Design / Sketch

Pattern Design

Sample Making

Production Pattern


Marker Making






Pressing/ Finishing

Final Inspection



Description above these process are given below:

1. Design/ Sketch:
For the production of knit garments, or woven garments a sketch of a particular garment including its design features is essential to produce on paper so that after manufacturing of that garment could be verified or checked whether could be done manually or with the help of computer.

2. Pattern Design:
Hard paper copy of each component of the garment of exact dimension of each component is called pattern. The patterns also include seam allowance, trimming allowance, dirts, and pleats, ease allowance, any special design etc affairs. Pattern design could also be done manually or with the help of computer.

3. Sample Making:
The patterns are used to cut the fabric. Then the garment components in fabric form are used to sew/assemble the garment. Sample garment manufacturing is to be done by a very efficient and technically sound person.

4. Production Pattern:
The patterns of the approved sample garment are used for making production pattern. During production pattern making, sometimes it may be necessary to modify patterns design if buyer or appropriate authority suggests any minor modification.

5. Grading:
Normally for large scale garments production of any style needs different sizes to produce from a set of particular size of patterns, the patterns of different sizes are produced by using grade rule which is called grading.

6. Marker Making:
All the pattern pieces for all the required sizes are arranged n the paper in such a way so that maximum number of garments could be produced with minimum fabric wastag4e. Markers are made for 6, 12, 18, 24 etc. pieces. Marker is also useful to estimate fabric consumption calculations.

7. Spreading:
It is the process of arranging fabrics on the spreading table as per length and width of the marker in stack form. Normally height of the lay/fabric is limited upto maximum six inches high. But 4 inch to 5 inch height of the lay is safe.

8. Fabric Cutting:
On the fabric lay/spread the marker paper is placed carefully and accurately, and pinned with the fabric to avoid unwanted movement or displacement of the marker paper. Normally straight knife cutting machine is used to cut out the garment component as per exact dimension of each patterns in stack form, care must be taken to avoid cutting defects.

9. Sorting/ Bundling:
After cutting the entire fabric lay, all the garments components in stack form is shorted out as per size and color. To avoid mistake in sorting, it is better to use code number on each pattern.

10. Sewing or Assembling:
It is the most important department/ section of a garment manufacturing industry. Sewing machines of different types are arranged as a vertical line to assemble the garments. Sequence of types of sewing machine arrangement depends on sequence of assembling operations. Number of sewing machine per line varies from 20 nos to 60 nos depending on the style of the ga4rmnet to be produce. Production pr line pr hour also varies from 100 to 150 pieces depending on specific circumstances. Number of sewing machine arrangement per line may be upto 60 depending on design and out put quantity of garment.

11. Inspection:
Each and every garment after sewing passes through the inspection table/ point, where the garments are thoroughly and carefully checked to detect/find any defect if present in the garment. The defects may be for example variation of measurement, sewing defect, fabric defects, spots etc. if the defect is possible to overcome, then the garment is sent to the respective person for correction. If the defect is not correctionable, then the garment is separated as wastage.

12. Pressing/ Finishing:
After passing through the inspection table, each garment is normally ironed/ pressed to remove unwanted crease and to improve the smoothness, so that the garments looks nice to the customer. Folding of the garment is also done here for poly packing of the garments as per required dimension.

13. Final Inspection:
It is the last stage of inspection f the manufactured garments on behalf of the garment manufacturing organization, to detect any defective garments before packing.

14. Packing:
After final inspection, the garments are poly-packed, dozen-wise, color wise, size ratio wise, bundled and packed in the cartoon. The cartoon is marked with important information in printed form which is seen from outside the cartoon easily. 
15. Despatch: 
The cartoons of the manufactured garments are delivered or placed in the despatch department or finished product godown, from where the garments lot is delivered for shipment.

Author of This Article:
undefinedNoor Ahmed Raaz
B.Sc. in Fashion & Design
University of Chittagong

Mobile: +8801722797194
Facebook: Raaz Noor


Comment here

Textile Learner is the largest Textile Blog over the net. It is an ultimate reference for textile students. It describes textile articles in comprehensive. It also supplies news on latest textile technology, educational institute news of the world.